Skip to main content Skip to main navigation Skip to footer
BASE Fertigung
The foundation for customised bodywork

BASE – The modular platform for maximum flexibility

Rather than rigid vehicle designs, BASE enables the development of bespoke transport solutions that are precisely tailored to specific requirements. From specialised transport tasks to custom-built bodywork, BASE adapts to a wide range of applications.

Technical data

Flexible. Robust. Reliable.

Payload
up to 250 kg
Gross vehicle weight
650 kg
Turning circle
< 6,750 mm
Electric starting aid (pushing aid)
yes, up to 4 km/h
Manufacturer
Muhr & Bender KG
Vehicle category
Pedelec
Electric motor
Chainless Powertrain
Continuous rated power
250 W*
Gearshift
two-speed transmission with manual boost gear
Max. gradeability under full load
18 %
Max. electrically assisted speed
25 km/h*
Electric reverse manoeuvring aid
yes, up to 4 km/h
Electric drive-off assistance (pushing aid)
yes, up to 4 km/h
Gross vehicle weight
650 kg
External dimensions, vehicle (L x W x H)
3,150 mm x 999 mm** x 2,000 mm***
Wheelbase
1,746 mm
Rear body
Baseplate
Dimension baseplate (L x W)
1,660 mm x 980 mm
Payload
up to 250 kg
Turning circle
< 6,750 mm
Battery capacity
AES SuperPack 2.0 (48 V)
Battery slots
Replaceable battery system with up to 2 slots (lockable)
Charger
230 V / 4 A
Max. range (per battery)
25 km
Display
3.5" TFT display
Suspension
Double wishbone axles at front and solid axles at rear with spring suspension strut and stabiliser bars
Wheels and tyres
16″ performance wheels with motorbike tyres (80/80-16″) and integrated reflector package
Braking system
Hydraulic disc brakes on all 4 wheels
Parking brake
Electromagnetic parking brake
Immobiliser incl. theft protection
RFID system with quick-lock function
Weather protection
Driver’s cab including windscreen wiper
Coating, front screen
Coating lotus effect
Wing mirrors
2x
Bells
1x
Headlights
2x
Rear lights
2x with integrated brake light and reversing light
Reflector package
yes
Indicators / Hazard lights
yes
Height- and tilt-adjustable saddle
yes
Licence required
no*
Testing & Certification
See footnote below ****
Applied technical standards and specifications
See footnote below *****

* According to national legislation. 
** Not incl. mirrors.
*** Height, if driver cabin is configured
**** Meets the protection objectives and all relevant provisions of the following directives; The Supply of Machinery (Safety) Regulations 2008 No. 1597; The Radio Equipment Regulations 2017 No. 1206; Restriction of Hazardous Substances (RoHS) 2012;
***** EN 15194:2018-11 Cycles - Electrically power assisted cycles - EPAC; DIN EN ISO 4210-2_2015-12 Cycles - Safety requirements for bicycles; DIN 33958:2014-12 Bicycles - Lighting equipment and dynamos; DIN EN ISO 12100:2011:03 Safety of machinery – General principles for design – Risk assessment and risk reduction; EN 17860-4:2025 Heavyweight carrier cycles - Mechanical and functional aspects;

Despite extensive checking of the technical data, we cannot exclude errors and accept no liability for the contents. Dimensions are approximate. The max. continuous rated power is limited to 250 W in the European Union. The continuous rated power refers to the highest system useful power that the motors deliver in a period of 30 minutes without the temperature rise exceeding a certain value. The maximum - short-term - peak power for pedelecs can deviate upwards. The use of cycle paths is approved in most countries of the EU. The current, national legislation applies.

BASE Handwerker
Detailaufnahme vom Akku und Radaufbau des PACK.

My ideal solution for bespoke designs that go beyond standard solutions.

BASE

Configure your own eCargobike

Why not design your own BASE now in just a few easy steps?